[Notification of CAD Data Download Issue] We regret to inform you that we are currently experiencing issues with downloading CAD data for some products.
We are investigating the cause of this problem. We apologize for any inconvenience this may cause and appreciate your understanding.

Business > Industrial Devices > Automation Controls Top > RX2-D300

RX2-D300 | Robust Photoelectric Sensor RX(Discontinued)

CAD data　 Catalogs　 Manuals　 Software
FAQ

*Photo may vary from actual product.

Discontinued
September 30, 2020

Product Number	RX2-D300
Part Number	RX2-D300
Product	Robust Photoelectric Sensor
Details	DC 2-wire type Diffuse reflective
Product name	Robust Photoelectric Sensor RX(Discontinued)

-
-
-
Sorry, no suggested alternative products.

Spec Detail As of September 30, 2020

Item	Specifications
Product Number	RX2-D300
Part Number	RX2-D300
Regulatory compliance	EMC Directive, RoHS Directive
Sensing range	300 mm 11.811 in (Note) The sensing range and the hysteresis of the specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
Sensing object	Opaque, translucent or transparent object (Note) Make sure to confirm detection with an actual sensor before use.
Hysteresis	15 % or less of operation distance (Note) The sensing range and the hysteresis of the specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
Repeatability(perpendicular to sensing axis)	0.5 mm 0.020 in or less
Supply voltage	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption	1 mA or less (Note) It is the leakage current when the output is in the OFF state.
Sensing output	Non contact DC 2-wire type - Load current: 5 to 100 mA - Residual voltage: 4 V or less (Note) (Note) When extending the cable, the residual voltage will be increased depending on the type of cable used. Verify the residual voltage when extending the cable.
Sensing output:Output operation	Switchable either Light-ON or Dark-ON
Sensing output:Short-circuit protection	Incorporated
Response time	3 ms or less
Operation indicator	Red LED (lights up when the output is ON)
Stability indicator	Green LED (Light-ON mode: lights up under stable light received condition, Dark-ON mode: lights up under stable dark condition)
Emitting indicator	-
Sensitivity adjuster	Continuously variable adjuster
Protection	IP67 (IEC)
Ambient temperature	-20 to +60 degrees -4 to +140 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance	Incandescent light: 3,500 Lx or less at the light-receiving face
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element	Infrared LED (modulated)
Emitting element:Peak emission wavelength	890 nm 0.035 mil
Material	Enclosure: Die-cast zinc alloy Indicator cover: Polyethersulphone Lens: Polycarbonate
Cable	0.15 mm2 2-core oil, heat and cold resistant cabtyre cable, 2 m 6.562 ft long
Cable extension	- (Note) When extending the cable, the residual voltage will be increased depending on the type of cable used. Verify the residual voltage when extending the cable.
Weight	70 g approx.
Accessory	MS-RX-1 (Sensor mounting bracket): 1 set Adjusting screwdriver: 1 pc