FP7 CPU unit Upgrade Tool
Information you need to know before using the software (Essential reading)
About FP7 CPU unit Upgrade Tool
FP7 CPU unit Upgrade Tool is the software to update the firmware by connecting a PC and the FP7 CPU unit with a USB cable.
EDS files are stored in this upgrade tool.
This upgrade tool enables the upgrade of the CPU unit to the following version.
| ・Standard model (Excluding AFP7CPS21 / AFP7CPS2R) | ： | Ver.4.57 (The unit that the upgrade is not supported will be upgraded to the latest version of Ver.3.) |
|---|---|---|
| ・Low cost type (AFP7CPS21 / AFP7CPS2R) | ： | Ver.1.57 |
Confirm the product number of the FP7 CPU unit if it can be upgraded with this software.
The product numbers of PLCs that can be upgraded with this upgrade tool are as follows.
- AFP7CPS41E
- AFP7CPS31E
- AFP7CPS31
- AFP7CPS41ES
- AFP7CPS31ES
- AFP7CPS31S
- AFP7CPS21
- AFP7CPS4RE
- AFP7CPS3RE
- AFP7CPS3R
- AFP7CPS4RES
- AFP7CPS3RES
- AFP7CPS3RS
- AFP7CPS2R
Unfortunately the PLCs of the following model numbers cannot be upgraded.
- AFP7CPS3
- AFP7CPS3E
- AFP7CPS4E
For using FP7 CPU-Ver.3.20 or later, FPWIN GR7 Ver.2.5 or later should be used.
Using a version older than Ver.2.5 affects the display of the system monitor area. (Standard model only)
System Requirements
Make sure that the computer on which you intend to run the software meets the minimum specifications listed below.
| OS | Windows 10 (32bit / 64bit) / 11 (64bit) |
|---|---|
| Available hard disk space | 100MB or more |
| Recommended CPU | Pentium4 1GHz or more |
| Recommended system RAM | 1 GB or more |
| Recommended display resolution | 1280 x 800 px or more |
| Recommended color depth | High Color (32bit) or more |
| *1 | Microsoft Windows, Windows 10 and 11 are registered trademarks of Microsoft Corporation in the United States and/or other countries. |
|---|
Software License Agreement
Please note that acceptance of the Software License Agreement is a condition for using this software.
Please carefully review the contents and proceed with the installation only if you agree to its terms.
How to Install
1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.
*When you already have indicated the download destination, the file will be downloaded automatically.
 |
Title | Language | Version | File size | Update |
|---|---|---|---|---|---|
| fp7cpu_v0457_en.zip | EN | 4.57 | 7.5MB | April 1, 2024 |
Please note that acceptance of the Software License Agreement is a condition for using this software.
Please carefully review the contents and proceed with the installation only if you agree to its terms.
2.Decompress the downloaded file.
3.Double-click the file (Fp7Cpu_V457_VupTool.exe) in the decompressed folder to activate the upgrade tool.
The following "Preparation for executing the upgrade tool" is required before the upgrade.
The screen of the upgrade tool will appear. Upgrade the FP7 CPU unit according to the procedure.
| * | Do not turn off the power to the FP7 CPU unit or remove the USB cable during the upgrade. It may cause a damage to the FP7 CPU unit. |
|---|
Preparation for executing the upgrade tool
- 1. Confirm the product number of the FP7 CPU unit if it can be upgraded with this software.
- 2. Set the operation mode switch on the FP7 CPU unit to PROG.
- 3. Connect the target FP7 CPU unit and a PC with a USB cable, and turn on the power.
- 4. When FPWIN GR is active, set it to offline.
