【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Photoelectric Sensors / Laser Sensors > Amplifier-separated Type Digital Laser Sensor LS-500
|
Industry’s smallest* laser sensor head
LASER CLASS 1
|
CE
, FDA
, UKCA
Approved
* Amplifier-separated type laser sensor head as of September 2014, in-company survey
* Amplifier-separated type laser sensor head as of September 2014, in-company survey
Stainless steel (SUS) body |
1 m 3.281 ft sensing range(In STD amplifier response time mode) |
*Amplifier-separated type laser sensor head as of September 2014, in-company survey
Waterproof IP67Featuring waterproof IP67 to allow use in the presence of large amounts of water or dust. Simple positioningCheck the optimal receiving location at a glance while watching the red spot on the beam axis adjustment screen. 1 m 3.281 ft sensing range(In STD amplifier response time mode)The LS-H102 delivers sufficient sensing range for use with 450 mm 17.717 in wafers. |
Two-point installationThe thru-beam type LS-H102 features the same form as the EX-L200 amplifier built-in ultra-compact laser sensor. And it can be used as an EX-L200 with a digital indicator. |
*Amplifier-separated type laser sensor head as of September 2014, in-company survey
Featuring a 60% smaller design (by volume) than previous coaxial reflective modelsOur smallest unit is smaller in every dimension at just W8 × H23 × D18 mm W0.315 × H0.906 × D0.709 in (excluding indicators). |
Coaxial designBy using a laser with high linearity in a coaxial design, the LS-H201 is able to deliver stable sensing in confined spaces as well as simple installation. |
Small, long-range spotThe LS-H201 produces a spot with a diameter of 2 mm 0.079 in at a sensing range of up to 300 mm 11.811 in (in STD amplifier response time mode). |
Easy-to-see operation indicatorThe LS-H201’s operation indicator is visible from all directions. |
* Amplifier-separated type laser sensor head as of September 2014, in-company survey
Featuring a simple system design process thanks to a light source that is placed in the center of the sensor head and a coaxial design.
Industry’s smallest* and thinnest designThe LS-H901 is even thinner than previous models, measuring just W8 × H23 (excluding indicators) × D18 mm W0.315 × H0.906 × D0.709 in. |
* Amplifier-separated type laser sensor head as of September 2014, in-company survey
Sensing range of 10 mm to 1 m
0.394 in to 3.281 ft |
* Amplifier-separated type laser sensor head as of September 2014, in-company survey
Maximum compatibility with fiber sensorsThe LS-500 series features the same operation, menu displays, and form factor as the FX-500 series for increased compatibility with fiber sensors. |
The LS-500 series can detect any reduction in incident light intensity, for example due to the accumulation of dirt such as dust, and issue an alarm. Sensing output 2 can be set as self-diagnosis output. When you teach the threshold for sensing output 1, sensing output 2 is set accordingly, allowing you to shift the threshold by a previously set margin.
The LS-500’s threshold-tracking function helps maintain stable sensing over the long term and reduce maintenance man-hours. The incident light intensity can be checked and the threshold automatically reset at a user-selected interval to track changes in light intensity due to environmental changes (such as dust, etc.) over extended periods of time.
The LS-500’s ability to perform three logic operations (AND, OR, and XOR) on a standalone basis eliminates the need for a dedicated controller, cuts down on wiring, and lowers costs. This functionality can also be combined with the FX-500 series.
Eight sets of amplifier settings can be stored in the unit’s built-in memory. The ability to save and load settings reduces workload when changing the setup in a multimodel production environment.
Can connect to Open Network CC-Link IE Field / CC-Link /
DeviceNet / EtherCAT via Communication Unit for Open Network SC-GU3 series. Monitoring and various settings can be done from PLC, PC, etc.
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)