【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Timers / Counters / FA Componets > Timers > QM4H Digital Timers(DIN 48)(Discontinued Products) > Rating/ Performance
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
Item/Type | QM4H-S | QM4H-G | |||||
---|---|---|---|---|---|---|---|
Rating | Rated operating voltage | 12 to 48 V AC/DC and 100 to 240 V AC/DC | |||||
Rated power consumption | 12 to 48 V AC/DC |
During time delay | 12 V DC, 48 V DC: Max. 1.5W 12 V AC, 48 V AC: Max. 3.0 VA |
During time delay | 12 V DC, 48 V DC: Max. 1.0W 12 V AC, 48 V AC: Max. 2.0 VA |
||
After time delay | 12 V DC, 48 V DC: Max. 2.5W 12 V AC, 48 V AC: Max. 5.0 VA |
After time delay | 12 V DC, 48 V DC: Max. 1.5W 12 V AC, 48 V AC: Max. 3.5 VA |
||||
100 to 240 V AC/DC |
During time delay | 100 V DC, 240 V DC: Max. 1.5W 100 V AC, 240 V AC: Max. 3.0 VA |
During time delay | 100 V DC, 240 V DC: Max. 1.0W 100 V AC, 240 V AC: Max. 2.5 VA |
|||
After time delay | 100 V DC, 240 V DC: Max. 2.0W 100 V AC, 240 V AC: Max. 4.0 VA |
After time delay | 100 V DC, 240 V DC: Max. 1.8W 100 V AC, 240 V AC: Max. 3.2 VA |
||||
Rated frequency | 50/60 Hz common (at AC) | ||||||
Rated control capacity | 5 A, 250V AC (resistive load) | ||||||
Time range | 0.01s to 9990h, Selection of 8 range: 0.01s/0.1s/1s/0.1min/1min/0.1h/1h/10h | ||||||
Operation mode | Power ON delay | Power ON delay (with reset and stop terminals) | |||||
Min. input signal width | - | 20ms (Reset and Stop inputs)*4 | |||||
Time accuracy*1 | Operating time fluctuation |
±(0.01%+0.05s) in case of power on start ±(0.005%+0.03s) in case of input reset start*2 [Operating voltage: 85 to 110% V Temperature: -10 to +55°C/ +14 to 131°F (20°C 68°F) Stopped time: 0.1 sec to 1 hour] |
|||||
Temperature error | |||||||
Setting error | |||||||
Voltage error | |||||||
Contact | Contact arrangement | T.D. mode: Time delay 2C INST. mode: Time delay 1C and Instantaneous 1C (Use MODE switch on front) |
Time delay 1C | ||||
Contact material | Silver alloy | ||||||
Life*3 | Mechanical (contact) | Min. 107 | |||||
Electrical (contact) | Min. 105 (at rated control vltage) | ||||||
Electrical | Allowable operating voltage range | 85 to 110% of rated operating voltage | |||||
Breakdown voltage (Initial value) |
Between live and dead metal parts, between input and output, between contact sets, between contacts Min. 100 MΩ (at 500 V DC megger) |
||||||
Insulation resistance (Initial value) |
Between live and dead metal parts: 2, 000 Vrms for 1 min Between input and output: 2, 000 Vrms for 1 min Between contact sets: 2, 000 Vrms for 1 min Between contacts: 1, 000 Vrms for 1 min |
||||||
Reset time | Max. 0.1s | ||||||
Mechanical | Vibration resistance | Functional | 10 to 55 Hz: 1 cycle/min. single amplitude of 0.25 mm .010 inch (10 min on 3 axes) | ||||
Destructive | 10 to 55 Hz: 1 cycle/min. single amplitude of 0.375 mm .015 inch (1h on 3 axes) | ||||||
Shock resistance | Functional | 98 m/s2 (4 times on 3 axes) | |||||
Destructive | 980 m/s2 (5 times on 3 axes) | ||||||
Operating conditions | Ambient temperature | -10 °C to 55°C/ +14°F to +131°F | |||||
Ambient humidity | Min. 35 to 85% RH (non-condensing) | ||||||
Air pressure | 860 to 1060 hPa | ||||||
Others | Mass (Weight) | Approx. 130 g 4.59 oz | Approx. 120 g 4.23 oz | ||||
Available standards | UL, c-UL, CE | ||||||
Operating display | LED (red), During time delay: blinking, After time delay: OFF |
*1 | Unspecified measuring conditions are rated operating voltage (in case of DC type, ripple rate of 5% or less), ambient temp. 20℃ 68℉, and stop time 1 second. |
---|---|
*2 | Reset start applies to QM4H-G type. |
*3 | Excluding switches |
*4 | Note that if the QM4H-G type is set to zero “0” and a STOP signal is input, output will begin when the power is turned on. |
*5 | The protective structure on the AQM4801 is IP50, and IP64 for the AQM4803. |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)