【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

AUTOMATION
CONTROLS

Search
Discontinued
Products



HL (AZH) Micro Limit Switch (Discontinued Products)

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

Last time buy September 30, 2018
 
Rating/ Performance

Rating/ Performance

Ratings

Load Standard type Bifurcated type
Resistive Lamp Inductive Motor Resistive
N.C. N.O.
125 V AC 5A 1.5A 3A 2A 1A 0.1A
250 V AC 5A 1.5A 3A 1A 0.5A -
8 V DC 5A - 1.5A - - 0.1A
14 V DC 5A - 1.5A - - 0.1A
24 V DC - - - - - -
30 V DC 5A - 1.5A - - 0.1A
125 V DC 0.5A - 0.05A - - -
250 V DC 0.25A - 0.03A - - -

Notes)

1. The values above indicate steady-state current.
2. Parameter of inductive load: AC power factor: Min. 0.4; DC time constant: Max. 7 ms.
3. Lamp load generates 10 times of inrush current.
4. Motor load generates 6 times of inrush current.

Characteristics

タイプ Standard type Bifurcated type
Screw terminal type Connector type
Contact arrangement 1 Form C 1 Form C (Bifurcated contact)
Contact resistance Initial: Max. 15 mΩ Initial: Max. 100 mΩ Initial: Max. 150 mΩ
Contact material AgCdO Au clad Ag alloy (Cadmium free)
Insulation resistance Initial: Min. 100MΩ (at 500 V DC)
Initial breakdown voltage 1,000 Vrms for 1 min. between non-consecutive terminals
1,500 Vrms for 1 min. between dead metal parts and terminals
1,500 Vrms for 1 min. between ground and terminals
Shock
resistance		 Free position Max. 98 m/s2 {10 G}
Full operating position Max. 294 m/s2 {30 G}
Vibration resistance 10 to 55 Hz (Double amplitude for max. 1.5 mm)
Mechanical life 107 (at 120 cpm)
Electrical life 5×105 (at 20 cpm, 5 A 250 V AC resistive load) 5×105 (at 20 cpm, 0.1 A 125 V AC resistive load)
Ambient temperature -10 to +80 ℃ +14 to +176 ℉
Ambient humidity Max. 95% R.H.
Max. switching frequency Max. 120 cpm

Protective characteristics

Protective construction Die cast case Plastic case
IEC
IP64 ○ ○
IP67 ○ -

Operating characteristics

Die casting case

Characteristics Operating
force, max.
N
(gf)		 Release force,
min. N
(gf)		 Pretravel, max.
mm
(inch)		 Movement differential,
max.
mm
(inch)		 Overtravel, min.
mm
(inch)		 Operating
position,
max. mm
(inch)
Panel mount push plunger 11.8
(1200)		 4.90
(500)		 1.5
(0.059)		 0.1
(0.004)		 3.0
(0.118)		 17.4±0.8
(0.685±0.031)
Panel mount roller plunger 11.8
(1200)		 4.90
(500)		 1.5
(0.059)		 0.1
(0.004)		 3.0
(0.118)		 23.4±0.8
(0.921±0.031)
Panel mount cross roller plunger 11.8
(1200)		 4.90
(500)		 1.5
(0.059)		 0.1
(0.004)		 3.0
(0.118)		 23.4±0.8
(0.921±0.031)
Sealed push plunger 11.8
(1200)		 4.90
(500)		 1.5
(0.059)		 0.1
(0.004)		 3.0
(0.118)		 30.0±0.8
(1.181±0.031)
Sealed roller plunger 11.8
(1200)		 4.90
(500)		 1.5
(0.059)		 0.1
(0.004)		 3.0
(0.118)		 41.3±0.8
(1.626±0.031)
Sealed cross roller plunger 11.8
(1200)		 4.90
(500)		 1.5
(0.059)		 0.1
(0.004)		 3.0
(0.118)		 41.3±0.8
(1.626±0.031)
Short roller lever 3.92
(400)		 0.78
(80)		 2.0
(0.079)		 0.3
(0.012)		 4.0
(0.157)		 23.1±0.8
(0.909±0.031)
Roller lever 2.45
(250)		 0.39
(40)		 4.0
(0.157)		 0.6
(0.024)		 7.0
(0.276)		 23.1±0.8
(0.909±0.031)
One-way short roller lever 3.92
(400)		 0.78
(80)		 2.0
(0.079)		 0.3
(0.012)		 4.0
(0.157)		 34.3±0.8
(1.350±0.031)
One-way short lever 2.45
(250)		 0.39
(40)		 4.0
(0.157)		 0.6
(0.024)		 7.0
(0.276)		 34.3±0.8
(1.350±0.031)

Plastic case

Characteristics Operating
force, max.
N
(gf)		 Release force,
min. N
(gf)		 Pretravel, max.
mm
(inch)		 Movement differential,
max.
mm
(inch)		 Overtravel, min.
mm
(inch)		 Operating
position,
max. mm
(inch)
Push plunger 5.88
(600)		 0.98
(100)		 1.5
(0.059)		 0.1
(0.004)		 3.0
(0.118)		 25.4±0.8
(1.000±0.031)
Roller plunger 5.88
(600)		 0.98
(100)		 1.5
(0.059)		 0.1
(0.004)		 3.0
(0.118)		 31.4±0.8
(1.236±0.031)
Roller plunger 5.88
(600)		 0.98
(100)		 1.5
(0.059)		 0.1
(0.004)		 3.0
(0.118)		 31.4±0.8
(1.236±0.031)
Panel mount push plunger 5.88
(600)		 0.98
(100)		 1.5
(0.059)		 0.1
(0.004)		 3.0
(0.118)		 17.4±0.8
(0.685±0.031)
Panel mount roller plunger 5.88
(600)		 0.98
(100)		 1.5
(0.059)		 0.1
(0.004)		 3.0
(0.118)		 23.4±0.8
(0.921±0.031)
Panel mount cross roller plunger 5.88
(600)		 0.98
(100)		 1.5
(0.059)		 0.1
(0.004)		 3.0
(0.118)		 23.4±0.8
(0.921±0.031)
Sealed push plunger 5.88
(600)		 0.98
(100)		 1.5
(0.059)		 0.1
(0.004)		 3.0
(0.118)		 30.0±0.8
(1.181±0.031)
Sealed push plunger 5.88
(600)		 0.98
(100)		 1.5
(0.059)		 0.1
(0.004)		 3.0
(0.118)		 41.3±0.8
(1.626±0.031)
Sealed cross roller plunger 5.88
(600)		 0.98
(100)		 1.5
(0.059)		 0.1
(0.004)		 3.0
(0.118)		 41.3±0.8
(1.626±0.031)
Short roller lever 3.92
(400)		 0.78
(80)		 2.0
(0.079)		 0.3
(0.012)		 4.0
(0.157)		 23.1±0.8
(0.909±0.031)
Roller lever 2.45
(250)		 0.39
(40)		 4.0
(0.157)		 0.6
(0.024)		 7.0
(0.276)		 23.1±0.8
(0.909±0.031)
One-way short roller lever 3.92
(400)		 0.78
(80)		 2.0
(0.079)		 0.3
(0.012)		 4.0
(0.157)		 34.3±0.8
(1.350±0.031)
One-way short lever 2.45
(250)		 0.39
(40)		 4.0
(0.157)		 0.6
(0.024)		 7.0
(0.276)		 34.3±0.8
(1.350±0.031)
Flexible 0.88
(90)		 - 30.0
(1.181)		 - 20.0
(0.787)		 -

Return to top

Rating/ Performance
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE
Related Information
Service & Support

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)