[Notification of CAD Data Download Issue] We regret to inform you that we are currently experiencing issues with downloading CAD data for some products.
We are investigating the cause of this problem. We apologize for any inconvenience this may cause and appreciate your understanding.

Business > Industrial Devices > Automation Controls Top > Components & Devices > Relays / Couplers > Power Relays (Over 2A) > Power Relays (Over 2A) Lineup > HE-R Relays > Rating/Performance

HE-R Relays

Lineup
- DE Relays Compliant with European safety standards, 1 Form A/2 Form A/1 Form A 1 Form B 10 A/8 A Polarized power relays
- DJ Relays High insulation, 1-pole/2-pole 16 A, Polarized power relays
- DJ-H Relays Suitable for lighting and motor load, 1 Form A 50 A, Latching relays
- DK Relays 1 Form A 10 A, 1 Form A 1 Form B/2 Form A 8 A, Small polarized power relays
- DS Power Relays 1 Form A 8 A (AC) / 5 A (DC) , 1 Form A 1 Form B/2 Form A 5 A (AC/DC) , Small polarized power relays
- DW Relays 1 Form A 8 A/16 A, Small, Polarized power relays (latching type)
- DY Relays 1 Form A 10 A, 1 Form A 1 Form B 8 A, Small polarized power relays
- DZ-S Relays IEC62055-31 UC3 compliant, 1 Form A 90 A, Power latching relays
- HE Relays TV-10/TV-15 rated, 1 Form A 30 A, 2 Form A 25 A, Power relays
- HE Relays PV Type Compact size, 1 Form A 35 A/48 A/90 A Power relays for solar inverter
- HE-N Relays High capacity 120 A　490 V AC 1 Form A power relay
- HE-S Relays Compact size 2a and 2a1b 40 A power relays for energy management and industrial equipment
- HE-R Relays Compact size 2 Form A and 2 Form A 1Form B 80 A/4 Form A and 4 Form A and 1 Form B 40 A power relays
- JV-N Relays 1 Form A 16 A, low profile: 10.9 mm power relays for heater control
- JW Relays 1 Form A/1 Form C/2 Form A/2 Form C, 5 A/10 A, Power relays
- LD-P Relays Compliant with IEC/EN60335-1/ EN60079-15 (VDE approved) 1 Form A 5 A Slim power relays
- LF Relays Ideal for compressor and inverter loads, 1 Form A 20 A, Power relays
- LF-G Relays Load for solar inverter, Compact size, 1 Form A 22 A/33 A, Power relays
- LQ Relays Compliant with IEC/EN60335-1^*1^*2 /EN60079-15^*3 1 Form A/1 Form C 10 A small power relays
- LZ Relays Low profile: 15.7 mm, 1 Form A/1 Form C 16 A, Power relay
- LZ-N Relays EN60335-1 GWT compliant, 15.7 mm Low profile, 1 Form A/1 Form C 16 A, Power relays
- NC Relays Transistor drive, 2 Form C/4 Form C, 5 A Slim power relays
- PA-N Relays Complies with IEC61010 reinforced insulation, For PLC/Interface, 1 Form A 5 A, Slim power relay
- PF Relays Compliant with European standards, 1 Form A/1 Form C 6 A, Slim power relays
- S Relays 2 Form A 2 Form B/3 Form A 1 Form B/4 Form A /4 A Polarized power relays
- SP Relays 2 Form C 15 A, 4 Form C 10 A, Polarized power relays
- ST Relays 1 Form A 1 Form B/2 Form A, 8 A, Polarized power relays
CAD data　 Catalogs/Datasheets　　
FAQ

Click here for information on compliance with standards

Basic Information

Part Number

Rating/Performance

Dimensions

Coil data

Operating characteristics such as 'Operate voltage' and 'Release voltage' are influenced by mounting conditions,
ambient temperature, etc.
Therefore, please use the relay within ±5% of rated coil voltage.
'Initial' means the condition of products at the time of delivery.

Rated coil voltage	Operate voltage^*1 (at 20°C)	Release voltage^*1 (at 20°C)	Rated operating current (±10%, at 20°C)	Coil resistance (±10%, at 20°C)	Rated operating power	Max. allowable voltage (at 55°C)
12 V DC	Max. 75 % V of rated coil voltage (Initial)	Min. 5 % V of rated coil voltage (Initial)	333 mA	36.0 Ω	4,000 mW Holding^2: 490 mW^3	110 % V of rated coil voltage
24 V DC	Max. 75 % V of rated coil voltage (Initial)	Min. 5 % V of rated coil voltage (Initial)	167 mA	144.0 Ω	4,000 mW Holding^2: 490 mW^3	110 % V of rated coil voltage

*1	Square, pulse drive
*2	When using with the holding voltage, switch to the holding voltage after 200 ms from the application of the coil rated voltage.
*3	With 35% V coil holding voltage

Return to top

Specifications

Item

Specifications

Contact data

Contact arrangement

2 Form A (2a),
2 Form A 1 Form B (2a1b)

4 Form A (4a),
4 Form A 1 Form B (4a1b)

Form A
contact

Contact resistance (initial)

Max. 10 mΩ
(by voltage drop 20 A 6 V DC, after 3 min.)
Max. 3 mΩ
(by voltage drop 80 A 6 V DC, reference value)

Max. 10 mΩ
(by voltage drop 20 A 6 V DC after 3 min.)
Max. 3 mΩ
(by voltage drop 50 A 6 V DC, reference value)

Contact material

AgNi type

AgSnO₂ type

Contact rating (resistive)

80 A 277 V AC

40 A 480 V AC

Max. switching power
(resistive)

22,160 VA

19,200 VA

Max. switching voltage

277 V AC

480 V AC

Max. switching current

80 A

50 A

Min. switching load
(reference value)^*1

100 mA 24 V DC

Form B
contact
(4a1b type only)

Contact resistance (initial)

Max. 100 mΩ (by voltage drop 1 A 6 V DC)

Contact material

Au plated AgNi type

Contact rating (resistive)

0.5 A 30 V DC, 1 A 277 V AC

Max. switching power
(resistive)

15 W, 277 VA

Max. switching voltage

30 V DC, 277 V AC

Max. switching current

1 A

Min. switching load
(reference value)^*1

10 mA 5 V DC

Insulation resistance (initial)

Min. 1,000 MΩ
(at 500 V DC, Measured portion is the same as the case of dielectric strength)

Dielectric
strength
(initial)

Between open Form A contacts

2,000 Vrms for 1 min (detection current: 10 mA)

Between Form A contact and coil

5,000 V rms for 1 min (detection current: 10 mA)

Between Form A contact sets

5,000 V rms for 1 min (detection current: 10 mA)

Between open Form B contacts

1,000 V rms for 1 min (detection current: 10 mA)

Between Form B contact and coil

2,000 V rms for 1 min (detection current: 10 mA)

Between Form A contact and Form B contact

5,000 V rms for 1 min (detection current: 10 mA)

Surge
withstand
voltage
(initial)^*2

Between Form A contact and coil

10,000 V

Between Form B contact and coil

2,500 V

Coil holding voltage^*3

35 to 110% V
(at -40 to +55°C, Form A contact: 80 A)
35 to 50% V
(at -40 to +85°C, Form A contact: 70 A to 80 A)

35 to 110% V
(at -40 to +55°C, Form A contact: 50 A)
35 to 50% V
(at -40 to +85°C, Form A contact: 40 A to 50 A)

Time
characteristics
(initial)

Operate time

Max. 50 ms (at rated coil voltage, at 20°C, without bounce)

Release time^*4

Max. 30 ms (at rated coil voltage, at 20°C, without bounce, without diode)

Shock
resistance

Functional

25 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)

Destructive

980 m/s² (half-sine shock pulse: 6 ms)

Vibration
resistance

Functional

10 to 55 Hz (at double amplitude of 0.3 mm, detection time: 10 μs)

Destructive

10 to 55 Hz (at double amplitude of 1.5 mm)

Expected life

Mechanical life

Min. 100 x 10³ ope. (switching frequency: at 180 times/min)

Conditions

Conditions for usage,
transport and storage

Ambient temperature:	-40 to +55°C (When applied coil hold voltage is 35 to 110% V of rated coil voltage)
	-40 to +85°C (When applied coil hold voltage is 35 to 50% V of rated coil voltage or storage)
Humidity:	5 to 85% RH (Avoid icing and condensation)

Unit weight

Approx. 180 g

*1	This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
*2	Wave is standard shock voltage of ±1.2 x 50 µs according to JEC-212-1981
*3	Coil holding voltage is the coil voltage after 200 ms from the applied rated coil voltage.
*4	Release time will lengthen if a diode, etc., is connected in parallel to the coil. Be sure to verify operation under actual conditions.

Return to top

Expected electrical life

Conditions: Resistive load, Switching frequency: ON: OFF = 1 s: 9 s

Type		Switching capacity	Number of operations
2 Form A/ 2 Form A 1 Form B	Form A contact	63 A 277 V AC	Min. 50 x 10³ ope.
		70 A 277 V AC	Min. 30 x 10³ ope.
		80 A 277 V AC	Min. 10 x 10³ ope.
	Form B contact (2 Form A 1 Form B type only)	0.5 A 30 V DC	Min. 100 x 10³ ope.
	Form B contact (2 Form A 1 Form B type only)	1 A 277 V AC	Min. 100 x 10³ ope.
4 Form A/ 4 Form A 1 Form B	Form A contact	32 A 277 V AC	Min. 50 x 10³ ope.
	Form A contact	40 A 480 V AC	Min. 30 x 10³ ope.
	Form B contact (4 Form A 1 Form B type only)	0.5 A 30 V DC	Min. 100 x 10³ ope.
	Form B contact (4 Form A 1 Form B type only)	1 A 277 V AC	Min. 100 x 10³ ope.

Return to top

INSULATION CHARACTERISTICS (IEC61810-1)

Item	Characteristics
Clearance/Creepage distance	Min. 8.0/8.0 mm (Form A contact)
Category of protection	RT Ⅱ
Tracking resistance	PTⅠ 175
Insulation material group	Ⅲ a
Over voltage category	Ⅲ
Rated voltage	250 V
Pollution degree	3
Type of insulation (Between contact and coil)	Reinforced insulation (Form A contact)
Type of insulation (Between open contacts)	Full disconnection (Form A contact)