请在使用版本升级之前仔细阅读以下信息。
All the old firmwares for the GT series are available.
The firmware of the below products are updated;
使用本软件的条件是您同意本软件使用许可协议的内容。请仔细查阅内容,必须在您同意的情况下才能下载、安装和使用。
下载即视为同意本软件使用许可协议的全部内容。
[The original text of this Agreement is written in Japanese, and this translation does not have any effect, whether de jure or de facto.]
Panasonic Industry Co., Ltd., acting through its Industrial Device Business Division (hereinafter referred to as “us”, “our(s)” or "we") grants the Software license on condition that you have accepted this license agreement. Please be sure to read the Software license agreement (hereinafter referred to as this "Agreement") before using the Software, and do not use the Software without first accepting this Agreement.
On starting to use the Software, you will be deemed to have accepted all the terms of this Agreement. Please do not use the Software unless you accept this Agreement.
The Software may incorporate several open-source software programs in addition to proprietary computer programs in our possession or licensed to us. If open-source software programs are incorporated, please see the license statements included in the Software installation package for those programs. If there is any conflict between the license statements in the open-source software program licenses and those in this Agreement, the wording of the open-source software program licenses will prevail.
We grant you a non-exclusive license to use the Software for the purpose of using our products identified in the Software manual (hereinafter referred to as the "Products") in accordance with the terms of this Agreement. You may not use the Software for the purpose of using third-party products that are not ours.
The following acts are prohibited with regard to the Software.
(1) Altering, reverse-engineering, decompiling, or disassembling the Software, or any other act of a similar nature.
(2) Use of the Software other than by the methods prescribed in the manual provided by us or our website, or any other methods designated by us.
(3) Use of the Software for any purposes other than those prescribed in the manual provided by us or our website, or any other purposes designated by us.
(4) Distribution, renting out, leasing, loaning, or the assigning of the Software to any third party.
However, subject to the assignee's agreement to be bound by all the conditions of this Agreement, you may assign the Software license under this Agreement together with the Products.
In this case, you will deliver all the copies of the Software and its annexed documentation to the assignee, and you may not retain any copies of the Software, including backup copies.
We do not warrant the Software's merchantability, fitness for any particular purpose, or non-infringement of third-party intellectual property rights, and do not make any other warranties with regard to the Software.
2. We accept no responsibility for damage of any kind (including direct, indirect, incidental, consequential, and special damage) that results from the use of the Software, loss of its use, or any bugs, security holes, malfunctions or other glitches, or otherwise resulting from use of the Software.
This Agreement comes into effect when you accept it and start to use the Software.
2. If you are in breach of any of the provisions of this Agreement, we may immediately terminate this Agreement.
3. Within four weeks after this Agreement is terminated, you will return to us, or erase or destroy all of the Software and its copies at your expense.
You must comply with the export control laws, regulations, etc., of all countries that have jurisdiction over the parties hereto (including the Foreign Exchange and Foreign Trade Act of Japan, and export control regulations based on United Nations Security Council resolutions). If qualifications or appropriate approval by governmental agencies are required, it is prohibited to export the Software directly or indirectly to any countries without such approval. It is also prohibited to use or sell the Software directly or indirectly for military purposes.
Except for open-source software programs, all copyrights and other intellectual property rights to the Software are vested in us or our licensors.
It is within our discretion whether or not to offer Software upgrades or updates at any point in the future. If an upgrade or update is offered, a fee may be charged.
2. If a Software upgrade or update is offered, whether on a chargeable or non-chargeable basis, this Agreement will apply as part of the Software unless otherwise specified by us when the offer is made.
In no event will our liability associated with this Agreement or the Software exceed 10,000 yen.
We may modify this Agreement at any time at our discretion if
(1) the modifications to this Agreement are in conformity with your interest in general; or
(2) the modifications to this Agreement are not incompatible with the purpose of this Agreement, and are rational in light of the need for and reasonableness of the modifications, and other circumstances related to the modifications.
2. If we modify this Agreement pursuant to the preceding paragraph, we will announce our plan to modify this Agreement, the content of the modified version of this Agreement, and the date on which the modifications will come into effect on our website no later than two weeks before the effective date of the modified version of this Agreement. However, we may effect modifications without notice to you if they are of a minor nature or are not detrimental to you. This Agreement will be modified on the date that the modifications come into effect.
This Agreement is governed by the laws of Japan.
2. If any dispute arises in connection with this Agreement, the Osaka District Court will have exclusive jurisdiction over such dispute.
[1st Apr. 2024] Version
*自2024年4月1日起,以松下神视株式会社名义发布的软件商品中所有「松下神视株式会社」表述等同于「松下机电株式会社」。
指定保存的位置,点击[保存]按钮。
开始下载文件。
如果您不同意 "软件许可协议",将无法下载本软件。
请完整阅读 "软件许可协议" ,并勾选 "我已确认许可协议"。
| 标题 | 语言 | 版本 | 文件大小 | 更新日期 | |
|---|---|---|---|---|---|
| CN-Simplified | 9.7MB | 2021年3月22日 | |||
| CN-Simplified | 13.4MB | 2021年3月22日 | |||
| CN-Simplified | 14.8MB | 2021年3月22日 | |||
| CN-Simplified | 5.7MB | 2021年3月22日 | |||
| CN-Simplified | 9.5MB | 2022年6月1日 | |||
| CN-Simplified | 19.4MB | 2022年6月1日 | |||
| CN-Simplified | 24.0MB | 2022年6月1日 | |||
| CN-Simplified | 18.2MB | 2021年3月22日 | |||
| CN-Simplified | 13.7MB | 2022年6月1日 | |||
| CN-Simplified | 13.8MB | 2022年6月1日 |
Decompress the download file, then copy 'GT**.****' file to 'C:\Program Files (x86)\Panasonic Industry Terminal\GTWIN_V3\Tools\Sys_Files'.
The zip file contains all the old firmware. Please copy the firmware that version you need.
ex.) 'GT01M.1390' file is created for GT01(Ver.1.39).
Run the version-up tool from the start menu '[Panasonic Industry Terminal]-[GTWIN_V3]-[Tools]-[GT Ver_UP_V3]'
ex.)For GT01, select 'GT01 monochrome'
Press the [Start] button, then version-up starts. [Complete] dialog box is displayed after completing the tranfer.
*Please be sure not to power off during transfer